Saltar al contenido principal

Akku abtrennen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Alemán
Paso 4
Kobo Clara Colour Battery Disconnection: paso 0, imagen 1 de 3 Kobo Clara Colour Battery Disconnection: paso 0, imagen 2 de 3 Kobo Clara Colour Battery Disconnection: paso 0, imagen 3 de 3
  • Use pointed tweezers to peel off all of the coating around the battery connector head and its socket.

  • If the coating becomes too brittle and hard to peel off, reheat the connector and try again.

  • This is a meticulous process! Failure to remove enough of the coating could damage the plastic head during disconnection, so take your time!

Verwende eine spitze Pinzette, um die gesamte Beschichtung oben um den Akkustecker und seinen Anschluss herum zu entfernen.

Wenn die Beschichtung zu spröde wird und sich nur schwer entfernen lässt, erwärme den Stecker erneut und versuche es noch einmal.

Dies ist ein recht akribischer Vorgang! Wenn du nicht genug von der Beschichtung entfernst, kann der Kunststoffkopf beim Abtrennen beschädigt werden. Lass dir also Zeit!

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.