Saltar al contenido principal

안전 수칙

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Coreano

Traduciendo paso 1

Paso 1
Safety Precautions, Before you begin: paso 0, imagen 1 de 3 Safety Precautions, Before you begin: paso 0, imagen 2 de 3 Safety Precautions, Before you begin: paso 0, imagen 3 de 3
Before you begin
  • Drain your eReader's battery as much as possible before starting your repair. Ideally, it should be fully discharged.

  • Optionally, to drain the battery faster, navigate to MoreSettingsEnergy saving and privacy and set Automatically go to sleep after and Automatically power off after to Never.

  • When working on or near the battery, don't use sharp metal tools to avoid puncturing and shorting the battery.

  • Unplug all cables and fully shut down your eReader.

  • Your screen should be black and say Powered off.

수리를 시작하기 전에 eReader의 배터리를 최대한 방전시키세요. 이상적으로는 완전히 방전된 상태여야 합니다.

옵션으로 배터리를 더 빨리 방전시키려면 더 보기 → 설정 → 에너지 절약 및 개인정보 보호로 이동한 다음 자동으로 절전 모드 전환자동으로 전원 끄기사용하지 않음으로 설정하세요.

배터리 위나 배터리 근처에서 작업할 때는 배터리에 구멍이 나거나 합선되지 않도록 날카로운 금속 도구를 사용하지 마세요.

모든 케이블을 뽑고 eReader를 완전히 종료하세요.

스크린이 검은색으로 바뀌고 전원이 꺼짐이라고 표시되어야 합니다.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.