Saltar al contenido principal

Kobo Libra Colour电源按钮板更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Chino
Paso 12
Kobo Libra Colour Power Button Board Replacement, Soften the power button board adhesive: paso 0, imagen 1 de 1
Soften the power button board adhesive
  • The power button board is held in place with adhesive and aligned by two pegs in the frame.

  • Apply a heated iOpener to the power button board for 90 seconds to soften the adhesive underneath.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

电源按钮板用粘合剂固定,并通过 框架中的两个固定钉对齐。

用加热的 iOpener 在电源按钮板上持续 90 秒,以软化下面的粘合剂。

或者,你也可以用吹风机或热风枪吹 30 秒钟。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.