Saltar al contenido principal

Kobo Libra Colour Power-Button Platine tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Alemán
Paso 12
Kobo Libra Colour Power Button Board Replacement, Soften the power button board adhesive: paso 0, imagen 1 de 1
Soften the power button board adhesive
  • The power button board is held in place with adhesive and aligned by two pegs in the frame.

  • Apply a heated iOpener to the power button board for 90 seconds to soften the adhesive underneath.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

Die Platine des Power-Buttons ist mit Kleber befestigt und durch zwei Stifte im Rahmen fixiert.

Lege einen erwärmten iOpener 90 Sekunden lang auf die Platine des Power-Buttons, um den Kleber aufzuweichen.

Alternativ kannst du auch 30 Sekunden lang einen Fön oder ein Heißluftgebläse verwenden.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.