Saltar al contenido principal

Kobo Libra Colour电源按钮板更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Chino
Paso 3
Kobo Libra Colour Power Button Board Replacement: paso 0, imagen 1 de 3 Kobo Libra Colour Power Button Board Replacement: paso 0, imagen 2 de 3 Kobo Libra Colour Power Button Board Replacement: paso 0, imagen 3 de 3
  • Use pointed tweezers to peel off the coating around the locking tab and its hinge on the ZIF connector.

  • If the coating becomes too brittle and hard to peel off, reheat the power button board and try again.

  • This is a meticulous process! Failure to remove enough of the coating could damage the locking tab during disconnection, so take your time!

使用尖头镊子剥去 ZIF 接口上锁定片及其铰链周围的涂层。

如果涂层太脆,难以剥离,请重新加热电源按钮板,然后再试一次。

这是一个细致的过程!如果没有去除足够的涂层,可能会在断开连接时损坏锁片,所以要慢慢来!

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.