Saltar al contenido principal

Sostituzione batteria Kobo Libra Colour

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Italiano
Paso 3
Kobo Libra Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 1 de 3 Kobo Libra Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 2 de 3 Kobo Libra Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 3 de 3
Remove the stretch release adhesive
  • Grip a black pull tab and pull the strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the battery.

  • You can also wrap an adhesive strip around a spudger and "roll" it for a more consistent pull.

  • If the adhesive strip breaks off, try to retrieve it using your fingers and continue pulling—but don’t pry under the battery.

  • If you can't retrieve a strip, don't worry! Remove as much adhesive as possible and skip down two steps for an alternate method.

Afferra una linguetta nera e tira la striscia lentamente e costantemente a un angolo basso. Lasciale tempo per allungarsi e staccarsi da sotto alla batteria.

Puoi anche avvolgere la striscia adesiva intorno a uno spudger e "arrotolala" intorno per tirare con più costanza.

Se la striscia adesiva si rompe, prova a recuperarla usando le dita e continua a tirare, ma non fare leva sotto alla batteria.

Se non riesci a recuperare una striscia, non preoccuparti! Rimuovi più adesivo possibile e salta i prossimi due passi per un metodo alternativo.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.