Saltar al contenido principal

LG Refrigerator Water Inlet Valve Assembly Test and Replacement

Inglés
Español

Traduciendo paso 8

Paso 8
LG Refrigerator Water Inlet Valve Assembly Test and Replacement, Test the inlet valve assembly: paso 0, imagen 1 de 3 LG Refrigerator Water Inlet Valve Assembly Test and Replacement, Test the inlet valve assembly: paso 0, imagen 2 de 3 LG Refrigerator Water Inlet Valve Assembly Test and Replacement, Test the inlet valve assembly: paso 0, imagen 3 de 3
Test the inlet valve assembly
  • If you have a multimeter, you can use it to test the inlet valve assembly components.

  • Set the multimeter to the ohm (Ω) setting.

  • For the first solenoid, test the resistance between the wires from it at the connector.

  • The acceptable resistance is 360 to 420 Ω.

  • Repeat the test on the connector for the other solenoid.

  • The acceptable resistance is 360 to 420 Ω.

  • To test the flow meter, test the resistance between the wires from it at the connector.

  • The acceptable resistance is 4 kΩ to 30 kΩ.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.