Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.
Traduciendo paso 3
Paso 3
-
Insert the flat end of a spudger into the gap between the front and rear bezels.
-
Rotate your spudger until it is parallel to the front face of the display.
-
Run the spudger around the perimeter of the display to separate the rear bezel from its retaining clips.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.