Saltar al contenido principal
Inglés
Español

Traduciendo paso 14

Paso 14
Reapply a thin coat of thermal paste to the back of the IC. Use a self tapping screw to attach it to the heatsink. Now is also a good time to properly mount the transformer. I used some M3x15mm machine screws.
  • Reapply a thin coat of thermal paste to the back of the IC. Use a self tapping screw to attach it to the heatsink.

  • Now is also a good time to properly mount the transformer. I used some M3x15mm machine screws.

  • With those repairs made, all that is left is to reassemble the AMP. In my case, this Amp worked after replacing the TDA2030A

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.