Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
Unfasten the lower case
-
Use a Phillips screwdriver to remove the five 4.3 mm‑long screws securing the bottom half of the lower case.
-
Use a T5 Torx driver to remove the one 4.2 mm‑long screw securing the top half of the lower case.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.