Repara tus cosas Comunidad Tienda

iPhone 14 Pro Max 屏幕替换前提指南

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Paso 15
iPhone 14 Pro Max Screen prereq, Unfasten the battery connector cover screws: paso 0, imagen 1 de 2 iPhone 14 Pro Max Screen prereq, Unfasten the battery connector cover screws: paso 0, imagen 2 de 2
Unfasten the battery connector cover screws

  • Use a Y000 screwdriver to remove the eight screws securing the battery connector cover:

  • Six 1.3 mm-long screws

  • One 1.6 mm-long screw

  • One 1.9 mm-long screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the screen in place. Be sure to power your iPhone back down completely before you continue working.

松开电池连接器盖螺丝

使用 Y000 螺丝刀卸下固定电池连接器盖的八颗螺钉：

六颗 1.3 毫米长的螺丝

一颗 1.6 毫米长的螺丝

一颗 1.9 毫米长的螺丝

在整个维修过程中，请保管好每一个螺丝 ，并确保它们从哪里来到哪里去，以免损伤你的设备。

在重新组装期间，这是在将屏幕密封到位之前打开 iPhone 并测试所有功能的好时机。 在继续工作之前，请务必将 iPhone 完全断电。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.