Saltar al contenido principal

Sostituzione assemblaggio fotocamera frontale iPad Pro 12.9" 3° Gen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Italiano

Traduciendo paso 5

Paso 5
iPad Pro 12.9" 3rd Gen Front Camera Assembly Replacement, Remove the front camera: paso 0, imagen 1 de 3 iPad Pro 12.9" 3rd Gen Front Camera Assembly Replacement, Remove the front camera: paso 0, imagen 2 de 3 iPad Pro 12.9" 3rd Gen Front Camera Assembly Replacement, Remove the front camera: paso 0, imagen 3 de 3
Remove the front camera
  • The front camera is strongly adhered to the frame with heat-resistant epoxy. Work slowly to avoid damaging surrounding components.

  • Insert the flat end of a spudger underneath the front camera, between the middle and right cables.

  • Twist the spudger to separate the epoxy securing the front camera.

  • This may require significant force.

  • Remove the front camera.

  • During reassembly, use a spudger to scrape off any remaining epoxy before reinstalling the front camera.

La fotocamera frontale è ben incollata al telaio con resina epossidica resistente al calore. Lavora lentamente per evitare di danneggiare i componenti circostanti.

Inserisci la parte piatta di uno spudger sotto la fotocamera frontale, tra il cavo centrale e quello destro.

Ruota lo spudger per separare la resina epossidica che tiene ferma la fotocamera frontale.

Ciò potrebbe richiedere molta forza.

Rimuovi la fotocamera frontale.

Durante il rimontaggio, usa uno spudger per grattare via tutta la resina rimasta prima di reinstallare la fotocamera frontale.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.