Saltar al contenido principal

iPad Pro 12.9インチ 第3世代 開口方法

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Japonés
Paso 13
iPad Pro 12.9" 3rd Gen Opening Procedure, Left edge information: paso 0, imagen 1 de 3 iPad Pro 12.9" 3rd Gen Opening Procedure, Left edge information: paso 0, imagen 2 de 3 iPad Pro 12.9" 3rd Gen Opening Procedure, Left edge information: paso 0, imagen 3 de 3
Left edge information
  • There are three cutouts along the left edge of the screen where the adhesive is very thin. Don't insert your opening pick more than 2 mm to avoid damaging the screen at these cutouts:

  • The upper cutout begins 4 cm from the top of the frame and is 3 cm long.

  • The middle cutout begins 12 cm from the top of the frame and is 3 cm long.

  • The bottom cutout is 4 cm from the bottom of the frame and is 3 cm long.

  • Everywhere else, don't insert your opening pick more than 5 mm.

スクリーンの左端には3つの切り込みがあり、接着剤が非常に薄くなっています。これらの切り込みでスクリーンを傷つけないように、オープニングピックを2mm以上差し込まないでください:

上部の切り込みは、フレームの上部から4cmのところから始まり、長さは3cmです。

中央の切り込みは、フレーム上部から12cmのところから始まり、長さは3cmです。

下の切り込みは、フレームの下から4cmのところから始まり、長さは3cmです。

それ以外の場所では、オープニング・ピックを5mm以上差し込まないこと。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.