Saltar al contenido principal

iPad Pro 12.9" 4e gen. Vervanging van het moederbord

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Holandés

Traduciendo paso 1

Paso 1
iPad Pro 12.9" 4th Gen Logic Board Replacement, Unfasten the Smart Connector cover: paso 0, imagen 1 de 1
Unfasten the Smart Connector cover
  • Use your Phillips screwdriver to remove the two 1.9 mm screws securing the Smart Connector cover.

Gebruik een kruiskopschroevendraaier om de twee 1.9 mm lange schroeven, waarmee de beugel op de Smart Connector is bevestigd, te verwijderen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.