Saltar al contenido principal

バッテリーのブロック

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Japonés
Paso 4
Battery Blocking, Battery connector information: paso 0, imagen 1 de 3 Battery Blocking, Battery connector information: paso 0, imagen 2 de 3 Battery Blocking, Battery connector information: paso 0, imagen 3 de 3
Battery connector information
  • These photos show what the battery connector looks like underneath the logic board. Use these photos as a reference while you safely disconnect the battery.

  • Notice that the battery connector has cantilever springs on the logic board that press against the battery contact pads. Since both the logic board and battery are glued down, you'll need to slide something thin and flexible between the contact points to disconnect the battery.

これらの画像は、ロジックボードの下にあるバッテリーコネクタの外観を示したものです。これらの写真を参考にしながら、バッテリーを安全に取り外してください。

バッテリーコネクタは、ロジックボード上にカンチレバースプリングがあり、バッテリーのコンタクトパッドに押し付けられていることに注目してください。ロジックボードとバッテリーは接着されているので、バッテリーを取り外すには、コンタクトポイントの間に薄くて柔軟なものを滑らせる必要があります。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.