Saltar al contenido principal

iPad Pro 12.9 英寸第四代前置摄像头组件更换件

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Chino

Traduciendo paso 1

Paso 1
iPad Pro 12.9" 4th Gen Front Camera Assembly Replacement, Unfasten the upper cable shield: paso 0, imagen 1 de 1
Unfasten the upper cable shield
  • Use your Phillips screwdriver to remove the four screws securing the upper cable shield:

  • Three 1.1 mm screws

  • One 2.0 mm screw

使用十字螺丝刀卸下固定上部排线盖的四颗螺丝:

三个 1.1 毫米螺丝

一颗 2.0 毫米螺丝

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.