Saltar al contenido principal

iPad Pro 12.9インチ 第4世代 フロントカメラアセンブリの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 1

Paso 1
iPad Pro 12.9" 4th Gen Front Camera Assembly Replacement, Unfasten the upper cable shield: paso 0, imagen 1 de 1
Unfasten the upper cable shield
  • Use your Phillips screwdriver to remove the four screws securing the upper cable shield:

  • Three 1.1 mm screws

  • One 2.0 mm screw

プラスドライバーを使って、上部ケーブルシールドを固定している4本のネジを外します。

長さ1.1 mm ネジー3本

長さ2.0 mmネジー1本

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.