Saltar al contenido principal

iPad Pro 12.9インチ 第4世代 開口方法

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Japonés
Paso 23
iPad Pro 12.9" 4th Gen Opening Procedure, Disconnect the upper sensors: paso 0, imagen 1 de 2 iPad Pro 12.9" 4th Gen Opening Procedure, Disconnect the upper sensors: paso 0, imagen 2 de 2
Disconnect the upper sensors
  • Use the point of your spudger to pry up and disconnect the upper sensors press connector.

  • To re-attach press connectors, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

スパッジャーの先端を使って、上部センサーのプレスコネクタの接続をこじ開けて外します。

このようなプレスコネクタを再装着するには、慎重に位置合わせをして、カチッと音がするまで片側を押し下げ、反対側も同様に押し下げます。中央部分は押さえないでください。コネクタの位置がずれると、ピンが曲がってしまい、永久的な損傷を与える可能性があります。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.