Saltar al contenido principal

iPad Pro 12.9インチ 第4世代 開口方法

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Japonés
Paso 21
iPad Pro 12.9" 4th Gen Opening Procedure, Unfasten the upper cable shield: paso 0, imagen 1 de 1
Unfasten the upper cable shield
  • Throughout this guide, keep track of each screw and reinstall it exactly where it came from.

  • Use your Phillips screwdriver to remove the two screws securing the upper cable shield:

  • One 1.8 mm-long screw

  • One 2.0 mm-long screw

  • During reassembly, this is a good point to power on your iPad and test all functions before sealing it up. Be sure to power your iPad back down before you continue working.

このガイドを通して、各ネジを記録し、元の場所に正確に取り付け直してください。

プラスドライバーを使い、上部ケーブルシールドを固定している2本のネジを外します:

長さ1.8 mmネジ-1本

長さ2.0 mmネジ-1本

再組み立ての際、iPadの電源を入れ、すべての機能をテストしてから封印するのがよいでしょう。作業を続ける前に、必ずiPadの電源を落としてください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.