Saltar al contenido principal

iPad Pro 12.9" 4th Gen 여는 절차

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Coreano
Paso 17
iPad Pro 12.9" 4th Gen Opening Procedure, Top edge information: paso 0, imagen 1 de 2 iPad Pro 12.9" 4th Gen Opening Procedure, Top edge information: paso 0, imagen 2 de 2
Top edge information
  • While the top edge adhesive softens, note the following:

  • There are two ambient light sensors near the corners. Only insert the very tip of your pick here to avoid damaging them.

  • There are three strips of heat dispersion tape. Angle your pick upward as you slice here.

  • The front-facing camera assembly is in the center of the top edge. Don't insert your pick here to avoid damaging them.

  • Everywhere else, don't insert your pick deeper than 5 mm to avoid damaging the screen.

상단 가장자리 접착제가 부드러워지는 동안 다음 사항에 유의하세요:

모서리 근처에 두 개의 주변 조명 센서가 있습니다. 센서가 손상됨을 방지하기 위해 픽의 끝 부분만 여기에 끼우세요.

열 분산 테이프가 세 개 있습니다. 이곳을 자를 때 픽의 각도를 위로 향하게 하세요.

전면 카메라 어셈블리는 상단 가장자리 중앙에 있습니다. 손상됨을 방지하기 위해 여기에 픽을 끼우지 마세요.

다른 모든 곳에서는 스크린이 손상됨을 방지하기 위해 픽을 5mm보다 깊게 끼우지 마세요.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.