Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 4
Paso 4
-
You will find a metal tab holding the disc drive in place. Push on the tab with a spudger to remove the disc drive. It is located below a previously removed screw.
-
Remove the three 4 mm Phillips #00 screws that were previously covered by the disc drive.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.