Saltar al contenido principal

Samsung Galaxy Book Pro 360 13" und 15" Gummifüße tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Alemán

Traduciendo paso 2

Paso 2
Samsung Galaxy Book Pro 360 15" Rubber Feet Replacement, Remove the rubber feet: paso 0, imagen 1 de 3 Samsung Galaxy Book Pro 360 15" Rubber Feet Replacement, Remove the rubber feet: paso 0, imagen 2 de 3 Samsung Galaxy Book Pro 360 15" Rubber Feet Replacement, Remove the rubber feet: paso 0, imagen 3 de 3
Remove the rubber feet
  • Insert an opening pick between the rear case and the rubber foot.

  • Pry up with the pick and dislodge the foot from the rear case.

  • Use tweezers or your fingers to remove the rubber foot.

  • Repeat this process on the remaining rubber feet.

  • There are two types of rubber feet for this laptop. During reassembly, make sure the top feet say "M4" and the bottom feet say "M1".

  • To reinstall a rubber foot, align it over the recess and push down until it's secured.

Setze ein Plektrum zwischen die Gehäuserückseite und dem Gummifuß ein.

Heble den Fuß mit dem Plektrum ein Stück weit nach oben heraus.

Entferne den Fuß mit einer Pinzette oder deinen Fingern.

Entferne auf die gleiche Weise alle restlichen Füße.

An diesem Laptop gibt es zwei Arten von Füßen. Achte darauf, dass die oberen Füße mit "M4" markiert sind und die unteren Füße mit "M1".

Richte beim Zusammenbau die Füße über den Vertiefungen aus und drücke sie nach unten fest.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.