Saltar al contenido principal

Procedimiento de apertura (1.ª y 2.ª generación)

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Español
Paso 22
Opening Procedure (1st and 2nd Gen), Separate the screen from the frame: paso 0, imagen 1 de 3 Opening Procedure (1st and 2nd Gen), Separate the screen from the frame: paso 0, imagen 2 de 3 Opening Procedure (1st and 2nd Gen), Separate the screen from the frame: paso 0, imagen 3 de 3
Separate the screen from the frame
  • Grab two opposing corners of the screen and gently separate the rest of the adhesive.

  • Don't fully remove the screen as it is held in place by several ribbon cables underneath.

  • Shift the screen towards the bottom right corner of the frame until the ambient light sensor ribbon cable near the top edge is uncovered.

Toma dos esquinas opuestas de la pantalla y separa suavemente el resto del adhesivo.

No retires completamente la pantalla, ya que se mantiene en su lugar mediante varios cables planos debajo.

Mueve la pantalla hacia la esquina inferior derecha del marco hasta que quede descubierto el cable plano del sensor de luz ambiental cerca del borde superior.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.