Saltar al contenido principal

Procedimiento de apertura (1.ª y 2.ª generación)

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Español
Paso 18
Opening Procedure (1st and 2nd Gen), Left edge information: paso 0, imagen 1 de 3 Opening Procedure (1st and 2nd Gen), Left edge information: paso 0, imagen 2 de 3 Opening Procedure (1st and 2nd Gen), Left edge information: paso 0, imagen 3 de 3
Left edge information
  • The left edge of the iPad contains several display cables. These cables are extremely fragile and easily damaged if an opening pick is inserted too far or at the wrong angle. Follow the instructions exactly as written to avoid damage.

  • The display cables are located within small indents of the frame and require an opening pick to be inserted at a 45° angle.

  • There are flat sections of the frame which require an opening pick to be inserted horizontally.

El borde izquierdo del iPad contiene varios cables de pantalla. Estos cables son extremadamente frágiles y se dañan fácilmente si se inserta una púa de apertura demasiado lejos o en el ángulo incorrecto. Sigue las instrucciones exactamente como están escritas para evitar daños.

Los cables de la pantalla están ubicados dentro de pequeñas hendiduras del marco y requieren que se inserte una púa de apertura en un ángulo de 45°.

Hay secciones planas del marco que requieren que se inserte una púa de apertura horizontalmente.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.