Repara tus cosas Comunidad Tienda

屏幕移除

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Paso 5
Screen Removal: paso 0, imagen 1 de 3 Screen Removal: paso 0, imagen 2 de 3 Screen Removal: paso 0, imagen 3 de 3

  • Heat an iOpener and thread it through the arms of the Anti-Clamp.

  • You can also use a hair dryer or heat gun—but extreme heat can damage the display and/or internal battery, so proceed with care.

  • Fold the iOpener so it lays on the bottom edge of the phone.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen frame when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn.

  • Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

加热 iOpen并将其穿过反向钳的手臂。

你也可以使用 吹风机或 热风枪，但过高的温度可 能会损坏显示屏和/或内部电池，因此请小心操作。

折叠 iOpen，使其位于手机底部边缘。

等待一分钟，让粘合剂有机会软化并出现缝隙。

当反向钳创造出足够大的间隙时，在屏幕边框下方插入三角撬片。

如果反向钳没有创造出足够的缝隙时，则对该区域施加更多的热量，并将手柄顺时针旋转半圈。

每次旋转手柄不要超过半圈，每圈之间要等一分钟。让反向钳和时间为你工作。

跳过下边两步

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.