屏幕移除

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés

Chino

Traduciendo paso 12

Paso 12

Slice the top edge adhesive

If the adhesive becomes hard to cut, it has most likely cooled down. Use your iOpener or heat gun for 1-2 minutes to reheat it.
When you slice near the front facing camera, insert only the tip of the opening pick (~2.5 mm) to avoid damaging or smearing the camera.
Insert a fourth opening pick at the top left corner of the screen.
Slide the opening pick along the top edge of the phone to slice the adhesive.
Leave the opening pick in the top right corner to prevent the adhesive from resealing.

切开上部粘合剂

如果粘合剂变得难以切割，很可能已经冷却。使用 iOpener 或热风枪加热 1-2 分钟。
在前置摄像头附近划开粘合剂时，请将撬片的尖端插入约 2.5 毫米，以免损坏或弄脏摄像头
在屏幕左上角插入第四个撬片。
沿着手机顶部边缘滑动撬片，切开粘合剂。
将撬片留在右上角，以防粘合剂重新密封。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.