Cricut Maker Top Door/ Lid Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés

Japonés

Traduciendo paso 3

Paso 3

Turn the device around, so that the back is facing you.
Look for the small rectangles along the back of the device. For every two rectangles, there is one cylindrical connector in between the two.
Wedge one or two iFixit opening picks in the seam connecting the Top Door to the device, and use the iFixit opening tool to pry upwards along the seam.
These actions should reveal the cylindrical connectors.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.