Repara tus cosas Comunidad Tienda

iPhone 14 Pro Max 屏幕替换

Inglés
Chino

Prerrequisitos de Guía

Deben traducirse todas las guías de prerrequisitos antes de que esta traducción se considere completa.

iPhone 14 Pro Max 五角螺丝更换

三角撬片深度标记

iPhone 14 Pro Max 屏幕替换前提指南

Información de Guía

= Hecho = Incompleto
    If your iPhone 14 Pro Max screen is cracked, not responding to touch, or not showing a picture when your phone is powered on, use this guide to restore your iPhone to working order with a new screen, a.k.a. display assembly.
    This guide was created using the ***A2894*** (international) model. If you're fixing a different iPhone 14 model, there may be some visual discrepancies, but the procedure should be the same.
    ***For your safety, discharge the battery below 25% before disassembling your device.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
    ***Note:***: On iOS 17.6 and earlier, True Tone and auto brightness functionality areis disabled after a screen replacement, even when using an original Apple screen. Face ID is also disabled, unless the iPhone runsis running iOS 15.2 or newer. On iOS 18 and newer, you can calibrate your new screen using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true] to restore True Tone functionality on genuine screens purchased from Apple.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      The best way to secure the new screen is to apply a sheet of custom-cut double-sided tape to the frame and place the screen back in its original position.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Pro+Max|Answers community] for help.

      Pasos de la guía

      Paso 1 — 松开前传感器盖

      其余步骤演示如何将前传感器组件转移到新屏幕。 如果更换屏幕已预装组件，请跳过这些步骤。

      Paso 2 — 拆下前传感器盖

      使用镊子或手指卸下前传感器组件盖。

      Paso 3 — 加热前传感器组件

      将iOpener 放在在屏幕上部至少两分钟，以软化屏幕胶水。

      Paso 4 — 断开接近传感器

      在接近传感器和屏幕上的凹槽之间插入三角撬片。

      Paso 5 — 断开环境光传感器

      在环境光传感器和它在屏幕上的凹槽之间插入撬片。

      Paso 6 — 拆下前传感器组件

      此时，粘合剂可能已经冷却下来。 如果是这样，在继续之前将加热的 iOpener 应用到组件上一分钟。

      Paso 7

      拆下前传感器组件。

      Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.