Saltar al contenido principal

Procedimiento de apertura

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 73 guías que incluyen este paso.

Inglés
Español
Paso 3
Opening Procedure, Anti-Clamp instructions: paso 0, imagen 1 de 3 Opening Procedure, Anti-Clamp instructions: paso 0, imagen 2 de 3 Opening Procedure, Anti-Clamp instructions: paso 0, imagen 3 de 3
Anti-Clamp instructions
  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Place an object under your iPad so it rests level between the suction cups.

  • Position the suction cups near the middle of the left edge—one on the top, and one on the bottom.

  • Hold the bottom of the Anti-Clamp steady and firmly press down on the top cup to apply suction.

  • If you find that the surface of your iPad is too slippery for the Anti-Clamp to hold onto, use tape to create a grippier surface.

Los siguientes tres pasos muestran el Anti-Clamp, una herramienta diseñada para hacer el procedimiento de apertura más fácil. Si no estás usando el Anti-Clamp, salta dos pasos para un método alternativo.

Para instrucciones completas de como usar el Anti-Clamp, checa esta guía.

Jala el mango azul hacia atrás para desbloquear los brazos del Anti Clamp.

Coloca un objeto debajo de tu iPad para que repose a nivel de las ventosas de succión.

Posiciona las ventosas de succión cerca del centro del borde izquierdo--una arriba, y una abajo.

Sostén el inferior del Anti-Clamp firmemente y presiona hacia abajo en la ventosa superior para aplicar succión.

Si encuentras que la superficie de tu iPad es muy resbalosa para que el Anti-Clamp se sostenga, usa cinta para crear una superficie con más agarre.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.