Saltar al contenido principal

iOpenerの使用方法

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 73 guías que incluyen este paso.

Inglés
Japonés
Paso 24
Opening Procedure: paso 0, imagen 1 de 2 Opening Procedure: paso 0, imagen 2 de 2
  • Be very careful with this step. Take your time, ensure the adhesive is hot and soft, and make sure you separated all of the adhesive with a pick. Don't be afraid to stop and reheat.

  • Twist the two opening picks on the left corners of the iPad to lift the digitizer slightly, separating the the last of the adhesive in the process.

  • If there's a significant amount of resistance, reheat the edges and work along them with an opening pick.

この手順では、時間をかけて慎重に作業を進めてください。接着剤が熱く、柔らかいことを確認し、あなたがピックで接着剤のすべてを分離していることを確認してください。そうでない場合は、作業を一旦停止し、接着剤を再加熱してください。

iPad左角にある2つのオープニングピックをひねってデジタイザーを少し持ち上げ、その作業の最後に接着剤を切り離します。

抵抗が大きい場合は、端を再度加熱し、オープニングピックで端に沿って作業します。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.