Saltar al contenido principal

フロントパネルアセンブリの取り外し

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Japonés
Paso 4
Front Panel Assembly Removal, Disconnect the display cables: paso 0, imagen 1 de 3 Front Panel Assembly Removal, Disconnect the display cables: paso 0, imagen 2 de 3 Front Panel Assembly Removal, Disconnect the display cables: paso 0, imagen 3 de 3
Disconnect the display cables
  • Use the flat end of a spudger to pry up and disconnect the two digitizer cable press connectors.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

デジタイザケーブルのプレスコネクタ2個を、スパジャーの平面側先端を使ってこじ開け、外します。

iPadの破損を避けるため、ロジックボード上のソケットではなく、コネクタのみをこじ開けるようにしてください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.