Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Use a Phillips #1 screwdriver to remove the five 5 mm screws that secure the base panel.
-
Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
-
Lift the base panel up and off of the chassis.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.