Saltar al contenido principal

iPhone SE 2022 Wi-Fi ダイバーシティアンテナの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Japonés
Paso 4
iPhone SE 2022 Wi-Fi Diversity Antenna Replacement, Disconnect the Wi-Fi diversity antenna: paso 0, imagen 1 de 2 iPhone SE 2022 Wi-Fi Diversity Antenna Replacement, Disconnect the Wi-Fi diversity antenna: paso 0, imagen 2 de 2
Disconnect the Wi-Fi diversity antenna
  • Use the pointed end of a spudger to disconnect the Wi-Fi diversity antenna by prying its connector straight up from its socket.

  • The socket of this connector sits loosely between the speaker and the Taptic Engine and it's a bit fiddly to disconnect the cable. To make the disconnection easier, you can use an opening pick to hold down the connector socket during this procedure.

  • Reconnecting this cable can be tricky. Make it easier by using tweezers to hold the flex cable so the connector aligns with its socket. Then, gently press straight down on the connector with the flat of your spudger until it clicks into place.

スパッジャーの先端部分を使い、Wi-Fiダイバーシティアンテナのコネクタをソケットからまっすぐ上にこじって外します。

このコネクタのソケットは、スピーカーとTaptic Engineの間に軽く装着されており、ケーブルを取り外す作業は少し難しいです。この時、開口ピックでコネクタのソケットを押さえれば、簡単に取り外すことができます。

このケーブルの再接続にはコツがいります。ピンセットでフレックスケーブルを持ち、コネクターがソケットと一直線になるようにすると、簡単に接続できます。そして、コネクターがカチッと音がするまで、スポンジの平らな部分でコネクターを優しく真直ぐに押してください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.