Saltar al contenido principal

iPhone 13 Pro Max Display tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Alemán
Paso 14
iPhone 13 Pro Max Screen Replacement, Open the iPhone: paso 0, imagen 1 de 3 iPhone 13 Pro Max Screen Replacement, Open the iPhone: paso 0, imagen 2 de 3 iPhone 13 Pro Max Screen Replacement, Open the iPhone: paso 0, imagen 3 de 3
Open the iPhone
  • Remove your suction handle from the screen.

  • Open your iPhone by swinging the display up from the right side, like the front cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

Entferne den Saugheber oder iSclack, falls du das bis jetzt noch nicht gemacht hast.

Öffne das iPhone so, wie man einen Buchdeckel aufschlägt, von rechts nach links hinüber.

Versuche noch nicht, das Display ganz zu entfernen. Es ist noch mit empfindlichen Flachbandkabeln am Logic Board des iPhone angeschlossen.

Lehne das Display gegen einem stabilen Gegenstand, so dass es während der Reparatur gut abgestützt stehen bleibt.

Lege das Display beim Zusammenbau in der richtigen Position hin und richte die Rasten an der Oberkante aus. Drücke dann erst die Oberkante fest und lasse dann das restliche Display einrasten. Wenn es nicht gut einrastet, dann überprüfe den Zustand der Rasten um das Display herum, und kontrolliere, ob sie nicht verbogen sind.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.