Saltar al contenido principal

iPhone 13 Pro Display tauschen

Inglés
Alemán
Paso 2
iPhone 13 Pro Screen Replacement, Anti-Clamp instructions: paso 0, imagen 1 de 3 iPhone 13 Pro Screen Replacement, Anti-Clamp instructions: paso 0, imagen 2 de 3 iPhone 13 Pro Screen Replacement, Anti-Clamp instructions: paso 0, imagen 3 de 3
Anti-Clamp instructions
  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over the left edge of your iPhone.

  • Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.

  • Squeeze the cups together to apply suction to the desired area.

  • If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use the included tape pad to create a grippier surface.

Wir haben die Anti-Clamp entwickelt, um das Öffnen von Geräten zu erleichtern. Die nächsten drei Schritte zeigen, wie sie verwendet wird. Wenn du sie nicht benutzen willst, überspringe die nächsten drei Schritte und folge einer anderen Methode.

Genaue Anweisungen für die Anti-Clamp findest du hier.

Drücke den blauen Griff zurück, damit die Arme der Anti-Clamp frei beweglich werden.

Schiebe die Arme über die linke Kante des iPhones.

Bringe die Saugheber nahe an der Unterkante des iPhones an, einen auf der Vorderseite, den anderen auf der Rückseite.

Drücke die Saugheber zusammen, so dass sie auf den Oberflächen haften.

Wenn die Saugheber nicht gut auf den Oberflächen des iPhones haften, dann kannst du die beiliegenden Stücke aus Klebeband verwenden, um eine griffigere Oberfläche zu schaffen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.