罗技 MX Master 3 适用于 Mac 鼠标脚（螺丝盖）拆卸

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 11 guías que incluyen este paso.

Inglés

Chino

Traduciendo paso 2

Paso 2

Separate the mouse foot adhesive

Slide an opening pick under an edge of the left mouse foot.
Go slowly, and make sure the pick slides underneath both the foot and its adhesive pad. These layers separate easily.
If you plan on reusing your mouse feet, be careful not to crease them or separate them from their adhesive pads.
If the foot feels stuck, apply more heat before continuing.
Slide your pick under the foot to separate its adhesive until you can grab it with your fingers.
Peel up and remove the left mouse foot.

分离鼠标脚贴

将三角撬片滑到鼠标左脚边缘下方。
慢慢地，确保撬片滑到脚及其粘合垫下方。这些层很容易分离。
如果您打算重复使用鼠标脚贴，请小心不要弄皱它们或将它们与粘合垫分开。
如果感觉卡住，请在继续之前再次加热。
将撬片到脚贴下以分离其粘合剂，直到您可以用手指抓住它。
剥开并取下鼠标左脚贴。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.