Describe la parte específica o el componente específico de este device en que estás trabajando. Ex: Batería
Crear un título.
Comunica información antes de que el lector empieze a leer la guía.
Paso 1
Start by pulling on the outer edges of the rubber part on the bottom of the enclosure.
Paso 2
Pry between the black hard plastic base and the colored rubber casing of your speaker.
Paso 3
Pull on the colored envelope, folding it on itself outwards.
Paso 4
Remove the 7 screws on the back of the enclosure.
Paso 5
Cleanly cut the foam and battery wrap.
Paso 6
Unsolder the two legs of the battery and take out the battery.
Paso 7
Solder the new battery, and replace the envelope with the foam, holding everything with tape.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.