Saltar al contenido principal

여는 절차 및 배터리 분리하기

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Coreano
Paso 12
Opening Procedure and Battery Disconnect: paso 0, imagen 1 de 3 Opening Procedure and Battery Disconnect: paso 0, imagen 2 de 3 Opening Procedure and Battery Disconnect: paso 0, imagen 3 de 3
  • Round the left corner with the opening pick and slide it along the top edge of the Surface. Stop when the pick is 2.75 inches (70 mm) away from the left edge.

  • The next 6 inches (15 cm) of the top edge of the case is covered by the left and right antennas, which sit between the case and the screen bezel. Follow the next steps carefully to avoid damaging the antennas.

여는 픽으로 왼편 모서리를 따라서 돌아 밀고 Surface 상단 가장자리를 따라 미세요. 픽을 왼편 가장자리에서 2.75인치를 (70mm) 남기고 멈추세요.

케이스 상단 가장자리의 다음 6인치는 (15cm) 케이스와 스크린 베젤 사이에 위치한 왼편 및 오른편 안테나로 덮여 있습니다. 안테나를 손상하지 않도록 다음 단계를 조심히 따르세요.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.