Saltar al contenido principal

開口方法とバッテリー接続の外し方

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Japonés
Paso 12
Opening Procedure and Battery Disconnect: paso 0, imagen 1 de 3 Opening Procedure and Battery Disconnect: paso 0, imagen 2 de 3 Opening Procedure and Battery Disconnect: paso 0, imagen 3 de 3
  • Round the left corner with the opening pick and slide it along the top edge of the Surface. Stop when the pick is 2.75 inches (70 mm) away from the left edge.

  • The next 6 inches (15 cm) of the top edge of the case is covered by the left and right antennas, which sit between the case and the screen bezel. Follow the next steps carefully to avoid damaging the antennas.

オープニングピックを、Surace左上の角に沿ってスライドします。ピックが左端から70 mm離れたところで停止します。

ケース上端から15 cmの箇所は、ケースとスクリーンベゼルの間にある左右のアンテナで覆われています。アンテナの損傷を防ぐために、次の手順を慎重に行ってください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.