Saltar al contenido principal

Reemplazo de la tapa trasera del Samsung Galaxy Note20 Ultra

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Español
Paso 4
Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: paso 0, imagen 1 de 3 Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: paso 0, imagen 2 de 3 Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: paso 0, imagen 3 de 3
Cut along the perimeter of the rear cover
  • While cutting through the adhesive, don't insert the opening pick more than 5 mm into the phone or you risk damaging the internal components.

  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • Slide an opening pick back and forth around the entire perimeter of the phone to release any missed adhesive. Reheat any stubborn adhesive.

Al cortar el adhesivo, no introduzcas la púa de apertura más de 5 mm en el teléfono o corres el riesgo de dañar los componentes internos.

Repite el proceso de calentar y cortar el adhesivo a lo largo de los tres lados restantes de la tapa trasera.

Puedes insertar cada nueva púa de apertura en los huecos creados por las púas de apertura dejadas en cada esquina.

A medida que vayas avanzando, deja una púa de apertura en cada esquina para evitar que el adhesivo se vuelva a sellar.

Si la tapa trasera sigue pegada al marco después de cortar los cuatro lados, intenta cortar de nuevo el adhesivo con una púa de apertura.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.