Saltar al contenido principal

三星 Galaxy Note20 Ultra 后盖更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Chino
Paso 4
Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: paso 0, imagen 1 de 3 Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: paso 0, imagen 2 de 3 Samsung Galaxy Note20 Ultra Rear Cover Replacement, Cut along the perimeter of the rear cover: paso 0, imagen 3 de 3
Cut along the perimeter of the rear cover
  • While cutting through the adhesive, don't insert the opening pick more than 5 mm into the phone or you risk damaging the internal components.

  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • Slide an opening pick back and forth around the entire perimeter of the phone to release any missed adhesive. Reheat any stubborn adhesive.

切开粘合剂时,请勿将撬片插入手机超过 5 毫米,否则可能会损坏内部组件。

沿着后盖的三个剩余侧面重复加热和切割粘合剂的过程。

你可以将每个新的初始选择插入由每个角留下的初始选择产生的间隙中。

继续操作时,在每个角落留下一个撬片,以防止粘合剂重新密封。

在手机的整个周边来回滑动撬片,以切割任何丢失的粘合剂。重新加热任何顽固的粘合剂。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.