Saltar al contenido principal

Reemplazo de Switch Romer G del teclado Logitech G PRO

Inglés
Español
Paso 13
Logitech G PRO Keyboard Romer G Switch Replacement: paso 0, imagen 1 de 2 Logitech G PRO Keyboard Romer G Switch Replacement: paso 0, imagen 2 de 2
  • Screw the four 6.4mm screws back in using a Phillips #1 screwdriver.

  • Screw the four 3.8mm screws back in using a Phillips #1 screwdriver.

  • This attaches the front casing and board back together.

Atornilla los cuatro tornillos de 6.4 mm de vuelta usando un desamador Phillips #1.

Atornilla los cuatro tornillos de 3.8 mm de vuelta usando un desamador Phillips #1.

Esto junta la carcasa frontal y la tarjeta de vuelta.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.