Repara tus cosas Comunidad Tienda

Changement carte Wi-Fi Xbox Series X

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Volver a la Guía
Inglés
Francés
Paso anterior

Traduciendo paso 2

Paso 2
Xbox Series X Wi-Fi Antenna Board Replacement: paso 0, imagen 1 de 3 Xbox Series X Wi-Fi Antenna Board Replacement: paso 0, imagen 2 de 3 Xbox Series X Wi-Fi Antenna Board Replacement: paso 0, imagen 3 de 3

  • Grip the antenna board and pull it directly away from the center chassis to disconnect it.

  • Don't pull the antenna board up until it's completely disconnected.

  • Remove the antenna board.

  • During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

Saisissez la carte Wi-Fi et retirez-la à l'horizontale du châssis principal.

Ne tirez pas la carte vers le haut avant qu'elle ne soit complètement déconnectée.

Retirez la carte Wi-Fi.

Lors du remontage, alignez le connecteur de la carte Wi-Fi avec le raccord du châssis principal et appuyez pour la reconnecter.

[* black] Grip the antenna board and pull it directly away from the center chassis to disconnect it.
- [* icon_caution] Don't pull the antenna board ***up*** until it is completely disconnected.
+ [* icon_caution] Don't pull the antenna board ***up*** until it's completely disconnected.
[* black] Remove the antenna board.
[* icon_reminder] During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.