Saltar al contenido principal

光学ドライブの取り外し

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 20 guías que incluyen este paso.

Inglés
Japonés
Paso 2
Optical Drive Removal, Twist and remove the base: paso 0, imagen 1 de 3 Optical Drive Removal, Twist and remove the base: paso 0, imagen 2 de 3 Optical Drive Removal, Twist and remove the base: paso 0, imagen 3 de 3
Twist and remove the base
  • Grip the base and rotate it counterclockwise to unlock it from the shell.

  • You may need to hold the locking tab open while you get the base started.

  • Remove the base.

  • During reassembly, drop the base tabs into their holes on the shell and twist clockwise until the base snaps into the interior locking tab.

  • When locked in place, the "Hello from Seattle" line will be parallel with the device's sides.

ベースを握り、反時計回りに回転させると、ロックが解除されます。

ベースを外すには、ロックタブを開いておく必要があるかもしれません。

ベースを取り出します

再組み立ての際には、ベースのタブを本体内部のタブに差し込み、内側のロックタブにカチッと装着するまで時計回りにねじります。

一旦ロックすると、”Hello from Seattle”のメッセージラインがデバイス側と一直線になります。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.