Saltar al contenido principal

Xbox Series X 风扇更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 31 guías que incluyen este paso.

Inglés
Chino

Traduciendo paso 3

Paso 3
Xbox Series X Fan Replacement, Remove the fan: paso 0, imagen 1 de 2 Xbox Series X Fan Replacement, Remove the fan: paso 0, imagen 2 de 2
Remove the fan
  • Slide the fan out of its slot to remove it.

  • During reinstallation, note that the fan can only be installed one way—make sure Master Chief is facing you.

  • If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.

将风扇滑出插槽以将其卸下。

在重新安装期间,请注意风扇只能以一种方式安装 - 确保上面的标志面向你。

如果你要更换风扇,新风扇可能不包括塑料安装支架。支架用 4 个 T10 Torx 螺丝固定在风扇上。这在本指南中没有显示。

[title] Remove the fan
[* black] Slide the fan out of its slot to remove it.
- [* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full|Master Chief|new_window=true] is facing you.
- [* icon_note] If you are replacing the fan, a new fan will probably not include the plastic installation bracket. The bracket is attached to the fan with 4 T10 Torx screws. This is not pictured in this guide.
+[* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full|Master Chief|new_window=true] is facing you.
+ [* icon_note] If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.