Saltar al contenido principal

iPhone 12 Pro Max ディスプレイアセンブリの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Japonés
Paso 14
iPhone 12 Pro Max Display Assembly Replacement, Separate the left adhesive: paso 0, imagen 1 de 2 iPhone 12 Pro Max Display Assembly Replacement, Separate the left adhesive: paso 0, imagen 2 de 2
Separate the left adhesive
  • Insert a second opening pick in the bottom left corner of the iPhone.

  • Twist both picks simultaneously until the left edge clips release.

  • Apply the twisting force gradually.

  • If you're having trouble separating the adhesive, reheat the left edge.

iPhoneの左下コーナーに2番目のオープニングピックを挿入します。

左端のクリップが外れるまで、両方のピックを同時にひねります。

少しずつ捻りながら力を加えていきます。

接着剤の分離がうまくいかない場合は、左端を再加熱してください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.