Xbox Series S 마더보드 교체하기

Inglés

Coreano

Traduciendo paso 2

Paso 2

With the head parallel to the motherboard, insert a flathead screwdriver from the side between the heat sink pin and the x-clamp hook.
Twist the flathead screwdriver clockwise to pry the bottom edge of the x-clamp out of the groove in the heat sink pin.
If you have trouble, try using a larger flathead screwdriver.
As you twist, the x-clamp should pop off the heat sink pin. If not, try repeating the previous step before attempting this one again.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.