Saltar al contenido principal

Xbox Series S Bluetooth 보드 교체하기

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Coreano

Traduciendo paso 1

Paso 1
Xbox Series S Bluetooth Board Replacement, Remove the Bluetooth board: paso 0, imagen 1 de 1
Remove the Bluetooth board
  • Use a T8 Torx driver to remove the three 9.5 mm-long screws securing the Bluetooth board to the long edge of the chassis.

T8 Torx 드라이버를 사용하여 블루투스 보드를 섀시 긴 가장자리에 고정하는 9.5mm 길이 나사 세 개를 풀어주세요.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.