Saltar al contenido principal

Changement coque en plastique Xbox Series S

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Francés
Paso 5
Xbox Series S Plastic Case Replacement, Remove the plastic case: paso 0, imagen 1 de 3 Xbox Series S Plastic Case Replacement, Remove the plastic case: paso 0, imagen 2 de 3 Xbox Series S Plastic Case Replacement, Remove the plastic case: paso 0, imagen 3 de 3
Remove the plastic case
  • With the bottom of the Xbox facing you, pull the two bottom-rear corners of the plastic case away from each other.

  • As you pull the corners apart, slide the back panel towards the bottom of the device. This releases the back panel from the plastic case.

  • The back panel should now settle on top of the clips on the back of the plastic case.

  • The back panel is permanently attached to the aluminum chassis.

  • Do not attempt to fully remove the chassis from the plastic case with this technique. You may risk breaking your case.

En plaçant le bas de la Xbox face à vous, tirez sur les deux coins arrière inférieurs de la coque en plastique pour les écarter.

Tout en écartant les coins, faites glisser l'arrière de la console vers le bas. Cette opération permet de dégager le panneau arrière du boîtier en plastique.

La face arrière doit maintenant reposer sur les clips situés à l'arrière du boîtier en plastique.

Le panneau arrière est fixé de manière permanente au châssis en aluminium.

N'essayez pas de retirer complètement le châssis du boîtier en plastique avec cette technique. Vous risqueriez de casser votre boîtier.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.