Repara tus cosas Comunidad Tienda

Temporary repairing Western Digital Essentials HD de-soldered USB connector

Volver a la Guía
Inglés
Español
Paso 5
Temporary repairing Western Digital Essentials HD de-soldered USB connector: paso 0, imagen 1 de 1

  • Be careful, this temporary repair is very fragile. Do not apply any tension on the USB connector or with the USB cable.

  • Before to continue, you should ensure one more time that the connectors are well in place to prevent from any short circuit. I recommend to:

  • First, plug and apply the electrical power on the logic board only do not plug the hard drive or even the USB connector. Wait for a minute if everything goes well!

  • You should use a hold computer if any available to you. Your computer should be protected from a short circuit here but we never know. Please don't use your brand new computer!

  • When you are ready to go:

  • Plug the hard drive with the USB/SATA bridge throug the SATA connector.

  • Carefully plug the USB connector to the logic board and your computer.

  • Apply electrical power on the hard drive.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.